Properties And Requirements Of Bearing Steel(2)
Leave a message
Rolling bearing materials include rolling bearing parts materials and cages, rivets and other auxiliary materials. The vast majority of rolling bearings and their parts are made of steel, and the steel used for rolling bearings is usually high carbon chromium steel and carburized steel. With the development of modern science and technology and the increasing use of rolling bearings, the requirements for bearings are getting higher and higher, such as high precision, long life and high reliability. For some special-purpose bearings, bearing materials are also required to have high temperature resistance, corrosion resistance, non-magnetic, ultra-low temperature, radiation resistance and other properties. In addition, bearing materials also include alloy materials, non-ferrous metals and non-metallic materials. In addition, bearings made of ceramic materials have been used in locomotives, automobiles, subways, aviation, aerospace, chemical and other fields.
The basic material requirements of rolling bearings depend to a large extent on the working performance of the bearing. Whether the material used to manufacture rolling bearings is suitable will have a great influence on its performance and life. In general, the main failure forms of rolling bearings are fatigue spalling under alternating stress and loss of bearing accuracy due to friction and wear. In addition, there are also cracks, indentations, rust and other reasons that cause abnormal damage to the bearing. Therefore, rolling bearings should have high resistance to plastic deformation, less friction and wear, good rotational accuracy, good dimensional accuracy and stability, and long contact fatigue life. And many of these properties are jointly determined by the material and the heat treatment process. Since the basic requirements of rolling bearings for materials are determined by the damage form of the bearings, the materials required to manufacture rolling bearings should have the following properties after a certain heat treatment in the post-process:
c. High elastic limit
When the rolling bearing is working, due to the small contact area between the rolling element and the raceway of the ring, when the bearing is under load, especially under the condition of large load, the contact pressure of the contact surface is very large. In order to prevent the occurrence of excessive plastic deformation under high contact stress, the loss of bearing accuracy or the occurrence of surface cracks, it is required that the bearing steel should have a high elastic limit.
d. Appropriate hardness
Hardness is one of the important indicators of rolling bearings. It has a close relationship with the material contact fatigue strength, wear resistance, and elastic limit, which directly affects the life of the rolling bearing. The hardness of the bearing is usually determined according to the general situation of the bearing's load bearing method and size, bearing size and wall thickness. The hardness of the steel used for rolling bearings should be appropriate, too large or too small will affect the service life of the bearing.
As we all know, the main failure forms of rolling bearings are contact fatigue damage, and the loss of bearing accuracy due to poor wear resistance or dimensional instability; if the bearing parts lack a certain toughness, they will be subjected to large impact loads due to brittle fracture. damage to the bearing. Therefore, the hardness of the bearing must be determined according to the specific situation of the bearing and the way of damage. For the loss of bearing accuracy due to fatigue spalling or poor wear resistance, higher hardness should be used for bearing parts; for bearings with large shock loads (such as rolling mills: bearings, railway bearings and some automotive bearings, etc.), it should be appropriately reduced. Hardness is necessary to improve the toughness of the bearing.
e, a certain impact toughness
Many rolling bearings will be subjected to a certain impact load during use, so the bearing steel is required to have a certain toughness to ensure that the bearing is not damaged due to impact. For bearings that bear large impact loads, such as rolling mill bearings, railway bearings, etc., the materials are required to have relatively high impact toughness and fracture toughness. Ensure that these bearings have good impact toughness.
f. Good dimensional stability
Rolling bearings are precision mechanical parts whose accuracy is measured in microns. During long-term storage and use, the bearing size will change due to changes in the internal structure or stress, resulting in the loss of accuracy of the bearing. Therefore, in order to ensure the dimensional accuracy of the bearing, the bearing steel should have good dimensional stability.
g, good anti-rust performance
There are many production processes for rolling bearings, and the production cycle is long. Some semi-finished or finished parts need to be stored for a long time before assembly. Therefore, bearing parts are prone to certain rust during the production process or during the storage of finished products, especially is in moist air. Therefore, the bearing steel is required to have good rust resistance.
h, good process performance
In the production process of rolling bearing, its parts go through multiple cold and hot working processes. This requires that the bearing steel should have good process properties, such as cold and hot forming properties, cutting, grinding performance and heat treatment properties, etc., to meet the needs of large-scale, high-efficiency, low-cost and high-quality production of rolling bearings.
In addition, for bearings used under special working conditions, in addition to the above-mentioned basic requirements, corresponding special performance requirements must be put forward for the steel used, such as high temperature resistance, high speed performance, corrosion resistance and anti-magnetic performance.







