Knowledge

Common problems that the shaft cross clamp (in the field of machinery, it may refer to components such as cross-axis universal couplings) may encounter during use mainly include the following aspects:

A groove or ridge made of metal or other material that bears, holds, guides and reduces friction of moving equipment or equipment. Longitudinal grooves or ridges on the surface of a rail used to guide

Axis cross clamps (also known as cross clamps or cross chucks) are often used in mechanical processing to fix workpieces or tools to ensure the accuracy and stability of the workpiece position during

Since the sliding film in the plastic linear bearing is made of self-lubricating plastic, it does not require additional oil supply and maintenance during use; and because the plastic linear bearing h

Lubrication and friction: Anti-corrosion oil is injected into the linear bearing. If it is lubricated with grease, first use kerosene or organic solvent to remove the anti-corrosion oil, and then add

The inner and outer diameters of the linear bearing adjustment type and open type bearing of the linear bearing are measured before the cut, and there will be some elastic deformation after the cut, a

Divided into two series namely LM and LME series. Its code name LM series is used in Asia, Southeast Asian countries, Japan, Korea, China and so on. Taking the metric size as the standard, the outer d

(1) Standard type, clearance adjustment type linear bearing, open type linear bearing, extended type linear bearing, general type linear bearing (2) Flanged linear bearings can be divided into: round

Plastic linear bearings have no special requirements for matching shafts; they can withstand larger loads than metal bearings, but because the movement between the bearing and the shaft is sliding fri

A linear bearing is a linear motion system used for linear travel in conjunction with a cylindrical shaft. Due to the point contact between the bearing ball and the bearing shell, the steel ball rolls

In optical fiber transmission, the ratio of the input optical power to the output optical power of an interface. For example, the ratio of the power emitted by the light source to the power received b

The strength of coupling depends on whether the division of modules is reasonable and the complexity of the interface between modules. Therefore, when dividing modules, try to: ① Eliminate unnecessary